Durocret Microcement

DUROCRET-DECO FLEX is used both internally and externally in numerous applications, such as stairs, floors, walls as well as for aesthetic reasons (e.g. Cycladic architecture), in houses, shops, hotels etc. Special constructions, such as built-in beds, built-in sanitary ware (washbasins, showers and more.)

Acryl Deco
Acryl Deco
Acryl Deco Pasty, white or colored, acrylic decorative coating, with a very smooth finish. Has high resistant to abrasion and mechanical load. Used on stairs, floors, walls etc. Its flexibility makes it suitable for applications that require high elasticity, such as on substrates made of gypsum or cement board, in-floor heating floors, etc. Suitable for both indoor and outdoor applications. ACRYL DECO is applied with a stainless, smooth, metal trowel in two layers, in a thickness of 1mm each. It is applied over a base of Durocret Deco Flex White. Size: 15kg Approx Coverage: 7.5sqm 2 coats When ordering, check colour chart and leave a note which colour you require.  
not rated £62.99 Add to cart
Arcocem Oxidant Agent
Arcocem Oxidant Agent 1lt
Arcocem Oxidant Agent 1lt Characteristics of oxidizing agent for natural metal paints We have one of the best products to oxidize iron. It is the Arcocem Oxidant Agent for the line of natural metal paints, it is a water based solution that reacts with ferrous metal particles activating and accelerating the oxidation process. Applicable indoors and outdoors. Applicable by brush, sponge, roller or spray. Depending on the oxidized effect that you want to obtain the average consumption is: 13-15 m2 / lt / layer Size: 1lt Coverage: 13-15 m2 per 1lt
not rated £12.99 Add to cart
Arcocem Iron Paint
Arcocem Painting Iron 1lt
Arcocem Painting Iron 1lt Arcocem Metal Iron-based water paint with fine iron particles whose application provides after its oxidized a natural iron oxide effect imitation reddish steel. The effect obtained is similar to the oxide effect paint for iron. In this way we get a rust-colored paint for iron with a metal effect in a natural way on a wide variety of support: micro cement, concrete, DM board, plasterboard panel, plaster or metals. Apply by trowel, spatula or roller, the metal oxide effect paint has high adhesion to the support. In areas that are not very absorbent, the Primacem Plus adhesion promoter is recommended first to achieve a good result with this metallic effect paint. Size: 1lt Coverage: 6-7 m2 / lt Click HERE to Buy the oxidizing agent
not rated £35.99 Select options
Colour Pigments
Colourant

Deco Color

High quality, inorganic pigments, used for colouring, Ideal for colouring Microcement. They may also be added in DUROCRET-DECO and DUROCRET-DECO FINISH Microcement, as well as many other cement mortars. Suitable for indoor and outdoor applications.

Size: 1 Dose per 20kg bucket of Microcement

Click HERE to open Colour Chart

not rated £8.00 Select options
Durocrete Deco Microcement
Durocret Deco

Durocret Deco 25kg

Polymer modified, fiber-reinforced, Microcement mortar. It provides excellent adhesion to the substrate, water repellency and abrasion resistance. For interior and exterior use in a variety of applications, on floors and walls, wherever an aesthetic intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.)

Click HERE to open Colour Chart

Approx Coverage: 1,5 kg/m²/mm layer

not rated £60.99 Select options
Durocret Deco Finish
Durocret Deco Finish

Durocret Deco Finish 25kg

Polymer-modified, extra fine-grained cement based mortar. It provides water repellency and very good adhesion to the substrate. After hardening a smooth final surface is formed. It is used in thin layers (1-3mm) as a cement mortar on cementicious substrates. Suitable for applications such as stairs, floors, walls and special constructions such as built sanitary ware (sinks, showers etc.). It can be applied in homes, hotels or wherever an aesthetic intervention is needed.

Click HERE to open Colour Chart

Approx Coverage: 1,4 kg/m²/mm of layer

not rated £60.99 Select options
Durocret Deco Flex
Durocret Deco Flex

DUROCRET-DECO FLEX is used both internally and externally in numerous applications, such as stairs, floors, walls as well as for aesthetic reasons (e.g. Cycladic architecture), in houses, shops, hotels etc. Special constructions, such as built-in beds, built-in sanitary ware (washbasins, showers and more.)

Approx Coverage: 1.5kg /m²/mm of layer thickness.

Click HERE to open Colour Chart

not rated £60.99 Select options
Flex Primer
Flex Primer

Flex Primer

Highly-penetrative, polymer aqueous emulsion, used in combination with Durocret Deco Flex, Durocret Deco and Durocret Deco Finish.

Coverage: 5-10 m²/kg.

Size: 1kg, 5kg & 20kg

not rated £12.00£99.00 Select options
Isomat Fibreglass Mesh
Isomat Fibreglass Mesh

Fibreglass Mesh

Ideal for reinforcing floors and walls when using Microcement. Our fibreglass mesh is very strong, flexible and thin and prevents cracks. Recommended to use on high traffic floors, stairs and tiled walls.

Coverage per roll: 50sqm

Weight: approx. 65g/m². Mesh: 1mm x 2mm.

not rated £10.99£69.99 Select options
Metallic Pigments
Metallic Pigments 100g
Our Metallic Pigments are specially designed to give a pearlescent and iridescent three dimensional look to your Designer Epoxy Resin floor. With a large array of colours and methods creating different finishes to your floor be it moon crater effect to making your floor look like a flawless sheet of marble. Our Metallic Pigments are composed of mica Nano particles that react with the epoxy resin to give your floor that extra gloss shine. With 20 colours to pick from and a near unlimited choice of coloured patterns, there’s plenty for you to choose to really inspire and be creative. No two floors are the same meaning you are guaranteed a bespoke finish to the envy of all your peers. We suggest 1 – 3 colours per floor Packaging 100 grams
not rated £10.99 Select options
Varnish-PU-2K
Varnish PU2K

Varnish PU2K

Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.

Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.

Finish: Gloss or Satin

not rated £35.00£110.00 Select options
Varnish PU 2K
Varnish PU2K

Varnish PU2K

Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.

Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.

Finish: Gloss or Satin

not rated £35.00£110.00 Select options