Back to Microcement

Aqua-Seal 20

£140.00

Aqua-Seal 20   5lt + 1lt

Two-component water-based polyurethane varnish with very high hardness and chemical resistance, ideal for high traffic surfaces. Very high resistance to scratching and chemical agents such as bleach, or vinegar. No absorption of wine, coffee or oil stains.
It has a higher solids content than most water based sealers, so it provides greater filling capacity with a more resistant finish. Very fast drying, it is recommended to make partial blends. It must be previously sealed with our Maxi-Prime. Suitable for exteriors and interiors.

For best results always use Maxi-Prime acrylic sealer before Aqua-Seal 20

Clear selection

Description

 Aqua-Seal 20   5lt + 1lt

Two-component water-based polyurethane varnish with very high hardness and chemical resistance, ideal for high traffic surfaces. Very high resistance to scratching and chemical agents such as bleach, or vinegar. No absorption of wine, coffee or oil stains.
It has a higher solids content than most water based sealers, so it provides greater filling capacity with a more resistant finish. Very fast drying, it is recommended to make partial blends. It must be previously sealed with our Maxi-Prime. Suitable for exteriors and interiors.

For best results always use Maxi-Prime acrylic sealer before Aqua-Seal 20

Approx Coverage: 1lt per 10sqm

Finish: Gloss, satin and matt.

Additional information

Weight N/A
Finish

Gloss, Satin, Matt

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Maxi-Seal 50
Maxi-Seal 50
Maxi-Seal 50   4lt + 2 lt

Maxi-Seal 50 is an acrylic solvent-based polyurethane two component (A + B) . Maxi-Seal 50 is suitable for continuous protection of cement based coatings on interior and exterior high traffic , exhibits increased resistance to water based polyurethane.

• Two component solvent-based polyurethane sealer for Microcement • Unprecedented levels of abrasion resistance • Unrivalled water resistance • Excellent coverage • Unaltered by bleach, hydrochloric acid or vinegar • Zero absorption of wine, coffee or oil • Apply 2 x coats, 12 hours apart • Surfaces must be pre-sealed with 2 x coats of Maxi-Prime • Suitable for use interior or exterior use • Masks and good ventilation required for installation For best results always use Maxi-Prime acrylic sealer before Maxi-Seal 50.

Finish: Gloss, Satin & Matt

Approx Coverage: 1lt per 7sqm

not rated £145.00 Select options