Floor Protector Plus Anti Slip 2.5L
An anti slip version of Floor Protector Plus, an exceptionally hard wearing anti slip coating that incorporates the latest polyaspartic technology
Ideal as a protective clear coating applied directly to concrete, or for the long term protection of epoxy and decorative floor finishes. Floor Protector Plus also has excellent protective properties when applied directly to metal surfaces. A two part polyaspartic product for internal and external application, use as a hard wearing coating or as a protective clear layer for other coatings.
- Finely textured slip resistant finish
- Protects existing attractive coatings from wear and tear
- Prevents UV Discolouration
- Suitable for internal and external applications
- Excellent chemical resistance
- Flexible to cope with movement in asphalt and around vibrating machinery
- Can be applied directly to metal
|Pendulum Slip Test Values|
|Dry PTV||Wet PTV|
|67 – Low slip potential||59 – Low slip potential|
|Surfaces||concrete, wood or metal & existing coatings|
|Interior/Exterior||interior & exterior|
|Curing time||light Traffic 10–12 hours, heavy trafic 16-24 hours, full cure in 7 days @ 15°C|
|Primer required?||very porous surfaces should be sealed with Epoxy Floor Prime 100 before pouring the resin|
|Coverage||25-30m² on smooth surfaces, textured or cold surfaces can affect coverage rates|
|Pot Life||25-30 minutes @ 15°C, higher temperatures will reduce this time|
|Shelf life||one year in sealed containers|
Bare concrete, asphalt, metal and existing floor coatings must be completely clean, sound and dry. Any surface contamination should be thoroughly cleaned using Bio-Clean Degreaser. It is essential that the cleaner is removed and that the floor is allowed to dry before application commences. If applying externally make sure that rain is not forecast.
Store in a temperature between 10-25°C for 8 hours prior to application. Mix each tin individually before combining and continuing to mix thoroughly, make sure that the side and base of the mixing vessel are scraped to ensure a thorough mix. If applying the anti slip version, add the aggregate at this stage. Continue to mix thoroughly until a uniform consistency and colour is obtained, only mix and apply one unit at once.
Ideally apply to a floor with a temperature of 0°C – +30°C although application is possible down to -10°C. Application below 0°C will result in the product thickening and loss of coverage. When mixed use a short microfiber roller and work out to around 25-30m².