Showing all 13 results
Aqua-Seal 20 5lt + 1lt
Two-component water-based polyurethane varnish with very high hardness and chemical resistance, ideal for high traffic surfaces. Very high resistance to scratching and chemical agents such as bleach, or vinegar. No absorption of wine, coffee or oil stains. It has a higher solids content than most water based sealers, so it provides greater filling capacity with a more resistant finish. Very fast drying, it is recommended to make partial blends. It must be previously sealed with our Maxi-Prime. Suitable for exteriors and interiors.For best results always use Maxi-Prime acrylic sealer before Aqua-Seal 20
Fibreglass Mesh - 50m x 1m or various sizes.
Ideal for reinforcing floors and walls when using Microcement. Our fibreglass mesh is very strong, flexible and thin and prevents cracks. Recommended to use on high traffic floors, stairs, and tiled floors and walls.
Coverage per roll: 50sqm
Maxi-Seal 50 4lt + 2 lt
Maxi-Seal 50 is an acrylic solvent-based polyurethane two component (A + B) . Maxi-Seal 50 is suitable for continuous protection of cement based coatings on interior and exterior high traffic , exhibits increased resistance to water based polyurethane.For best results always use Maxi-Prime acrylic sealer before Maxi-Seal 50.
Finish: Gloss, Satin & Matt
Approx Coverage: 1lt per 7sqm
Microcement Base + Resin
Main use: 2 coats before applying Microcement Fine and Microcement Medium.
High performance hydraulic microcement made from calcic cements and impalpable (medium) marble sands, aside from other additives that, when mixed with the above, furnish it with magnificent physical, chemical and aesthetic properties.
Microcement Fine + Resin
High performance hydraulic microcement made from calcic cements and impalpable (fine) marble sands, aside from other additives that, when mixed with the above, furnish it with magnificent physical, chemical and aesthetic properties.
Microcement Medium + Resin
Main use: Apply Microcement Medium after 2 coats of Microcement Base on high traffic floors, this product can also be applied to walls
High performance hydraulic microcement made from calcic cements and impalpable (fine) marble sands, aside from other additives that, when mixed with the above, furnish it with magnificent physical, chemical and aesthetic properties.It is used to produce highly decorative continuous lining that has a cement and mineral-like appearance; on high traffic floors, walls, bathtubs, sinks, and so on.
Acricem Acrylic Resin
Microcement Resin is the liquid component used to prepare Topciment two component (A+B) Microcement mortars. It is an acrylic resin which is ready to use.The Microcement powder (A) is mixed with the resin (B), The correct ratio of resin to Microcement powder must be used, please refer to Microcement product descriptions for full details.
Size: 5lt 10lt 25lt
Microcement Trowel 27cm x 11cm
Aqueous acrylic polymer dispersion, used as adhesion promoter between Microcement & non - absorbent surface, acting as a key between the two surfaces. Primer 200 improves grip and provides a key for the microcement on non-absorbent surfaces such as tiles, metal, marble and terrazzo. Approx Coverage: 1lt per 10sqmUse on all non - absorbent surfaces before applying Microcement