Aqua-Seal
Aqua-Seal Pro and Hardener For Floors & Walls
Aqua-Seal Pro and Hardener For Floors & Walls
2 Part polyurethane sealer. Unprecedented strength and stain resistance. Seals microcement to make it scratch resistant and waterproof. Applied with a roller in 2 coats. Choose between matt & satin. For best results always use Maxi-Prime acrylic sealer Aqua-Seal Pro and Hardener For Floors & Walls. Sizes: 1.1lt / 5.5lt   Delivery Approx: 2-3 Business Days      
not rated £65.00£185.00 Select options
Maxi-Seal 50
Maxi-Seal 50
Maxi-Seal 50   4lt + 2 lt

Maxi-Seal 50 is an acrylic solvent-based polyurethane two component (A + B) . Maxi-Seal 50 is suitable for continuous protection of cement based coatings on interior and exterior high traffic , exhibits increased resistance to water based polyurethane.

• Two component solvent-based polyurethane sealer for Microcement • Unprecedented levels of abrasion resistance • Unrivalled water resistance • Excellent coverage • Unaltered by bleach, hydrochloric acid or vinegar • Zero absorption of wine, coffee or oil • Apply 2 x coats, 12 hours apart • Surfaces must be pre-sealed with 2 x coats of Maxi-Prime • Suitable for use interior or exterior use • Masks and good ventilation required for installation For best results always use Maxi-Prime acrylic sealer before Maxi-Seal 50.

Finish: Gloss, Satin & Matt

Approx Coverage: 1lt per 7sqm

not rated £168.80 Select options
Varnish PU 2K
Varnish PU2K

Varnish PU2K

Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.

Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.

Finish: Gloss or Satin

not rated £42.00£139.00 Select options
Varnish PU2KW
Varnish PU2KW

Varnish PU2K

Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.

Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.

Finish: Gloss or Satin

not rated £42.00£139.00 Select options