Microcement Sealer
Showing all 3 results
Maxi-Seal 50
Maxi-Seal 50 4lt + 2 lt
Maxi-Seal 50 is an acrylic solvent-based polyurethane two component (A + B) . Maxi-Seal 50 is suitable for continuous protection of cement based coatings on interior and exterior high traffic , exhibits increased resistance to water based polyurethane.
• Two component solvent-based polyurethane sealer for Microcement • Unprecedented levels of abrasion resistance • Unrivalled water resistance • Excellent coverage • Unaltered by bleach, hydrochloric acid or vinegar • Zero absorption of wine, coffee or oil • Apply 2 x coats, 12 hours apart • Surfaces must be pre-sealed with 2 x coats of Maxi-Prime • Suitable for use interior or exterior use • Masks and good ventilation required for installation For best results always use Maxi-Prime acrylic sealer before Maxi-Seal 50.Finish: Gloss, Satin & Matt
Approx Coverage: 1lt per 7sqm
Varnish PU2K
Varnish PU2K
Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.
Finish: Gloss or Satin
Varnish PU2KW
Varnish PU2K
Two-component polyurethane varnish. Characterized by high abrasion strength and resistance to UV radiation. It is used as a protective varnish over decorative cement mortars. Also suitable for stone, wooden surfaces, cement-based floors etc. It provides a uniform glossy surface. It is certified with the CE marking as a coating for surface protection of concrete, according to EN 1504-2.
Coverage: 70-120 g/m² per layer, depending on the porosity of the substrate.
Finish: Gloss or Satin